How to install that disposal!!!

Let's finish installing that new disposal!
Page 2

The new disposal to put in.
The tools you will need.

Knock out the washer drain.

Remove the plate so you can put the wires in.

Strip the wire about 1/2" for the end.

Pull the wire throw the gromet about 3" so you can put it in the disposal.

Now it is time to hook up the wires uses two wire nuts then screw the ground wire to the the ground screw that is on the disposal.
MAKE SURE YOU PUT THE WHITE WIRE ON TO THE RIBBED WIRE ON THE CORD.

Now tighten the gromet.

Now tighten the screws that hold the wire.

Try to not get your shoe, lace stuck on the disposal.

Put the drain pipe together.

First put the drain pipe in before you put disposal in.

Now time to put the new disposal in.
Push the disposal up to the sink and turn the caller to the right.

Now tighten the drain pipe.

Tighten the coller.

Put the dishwasher hose back on.

There it is, you have done it.

The new disposal to put in.	The tools you will need.
Knock out the washer drain.
Remove the plate so you can put the wires in.
Strip the wire about 1/2" for the end.
Pull the wire throw the gromet about 3" so you can put it in the disposal.
Now it is time to hook up the wires uses two wire nuts then screw the ground wire to the the ground screw that is on the disposal. MAKE SURE YOU PUT THE WHITE WIRE ON TO THE RIBBED WIRE ON THE CORD.
Now tighten the gromet.
Now tighten the screws that hold the wire.
Try to not get your shoe, lace stuck on the disposal.
Put the drain pipe together.
First put the drain pipe in before you put disposal in.
Now time to put the new disposal in. Push the disposal up to the sink and turn the caller to the right.
Now tighten the drain pipe.
Tighten the coller.
Put the dishwasher hose back on.
There it is, you have done it.